A Race Bred Machine Individually Inspected by Yuichi Kanai.
Fine-tuned for continuous improvement by Yuichi Kanai, the new ‘Spec
A’ version of the Inferno MP9 TKI4 is packaged as a semi-assembled
chassis kit. Taking the previous TKI3 model’s reputation for speed to an
extreme level, the TKI4 features revised front/rear suspension that
delivers improved cornering stability for sharper control. Recent demand
for precision setting for aerodynamic performance is met with a newly
designed body and rear wing that realizes both advanced cornering
stability and traction. A thorough revision of all key components
focused on delivering an edge in the heat of racing battle through
superior maintenance, durability and reliability.
In addition, the ‘Spec A’ version is semi-assembled with complex
components such as Big Bore Shocks and differentials pre-built using the
special knowledge of skilled staff. Before shipping, Yuichi Kanai
completes a final check of each model to ensure it meets the standard
required for immediate racing success. Here is a model that is designed
not only for advanced racers, but for anyone who wants to challenge 1/8
buggy racing at the highest level.
Spec A Features:
Factory Assembled: Built in Kyosho Headquarters by
experienced staff, the Spec A comes factory assembled, with the final
inspection by Yuichi Kanai.
Pre-Cut Clear Body: No more wasting time cutting out the body; just add your paint and race.
Race Ready: The Spec A is built with a race ready setup having all adjustments set.
Front Shocks: 600wt
Rear Shocks: 500wt
Front & Center Diffs: 5000wt
Rear Diff: 3000wt
1.5x5 Hole Pistons
What's Needed to Complete Spec A:
Installation of electronics; such as receiver, servos and connect linkage
Paint body
Trim body to suit suit your engine head and exhaust.
Install engine, clutch, manifold, muffler, linkage and air filter.
Wing assembly and installation.
TKI4 Features at a Glance:
Most successful 1/8 off-road racing car in the history of RC
Evolution of the IFMAR World Champion MP9 TKI3
Redesigned body with improved aerodynamic features
Lighter wing with wickerbill attachments for tuning the level of downforce
Reinforced lower suspension arms
2mm longer front suspension arms for wider stance
Low-profile wing mounts with extra wing supports
Updated front suspension mounts for reduced “skid angle”
Includes KYOIFW459 Heavy Duty Servo Saver assembly
Uses 93mm driveshafts all around
Redesigned front steering knuckles for improved Ackerman geometry
Larger opening in radio box for servo leads and other electronic wiring
Redesigned aluminum rear hubs with inserts for more roll-center adjustments
Lightweight, more secure lower shock mounting pins
Stronger lower 4mm hingepins
Stronger, more secure air filter housing
Updated heavy-duty ball ends for the steering linkage
Lightweight 13T clutch bell
Specifications:
Length: 490mm
Width: 307mm
Height: 180mm
Ground Clearance: 28mm
Wheelbase: 325mm (4 settings / by changing rear hub collar position)
Tread (F/R): 254mm (rear 3, front 2 settings / by replacing bushes)
Tires (F/R): sold separately
Gear Ratio: 11: 7 :1
Weight: 2,950g approx.
Engine: 21 class (sold separately)
