The E-flite ICON A5 BNF Basic Electric Airplane park flyer makes it easy
to discover the thrill of amphibious flight. This Bind-N-Fly version
comes equipped with a powerful brushless motor and the smooth, stable
response of a Spektrum AS3X receiver. If you're a relatively new RC
pilot, you have the option of activating the receiver’s built-in SAFE
Select technology that limits pitch and bank angles so you don’t
accidentally put the model in an unrecoverable attitude during your
first few flights. It will also return the wings to level whenever the
sticks are released.
Features at a Glance:
Fast assembly
Officially licensed by ICON Aircraft
Spektrum AS3X® receiver with optional SAFE® Select technology
Integrated hull with removable landing gear
Detailed cockpit with pilot figure
Durable Z-Foam airframe
Factory-installed brushless motor, ESC and servos
Optional nose light set (sold separately)
In Depth Features:
Officially Licensed by ICON Aircraft: The officially licensed airframe and trim scheme are based that of the full-scale aircraft.
AS3X® Receiver with Optional SAFE6® Select Technology:
The AS3X (Artificial Stabilization – 3-aXis) receiver works behind the
scenes to smooth out the effects of wind and turbulence so you enjoy a
sense of stability and precision that makes you feel like you’re flying a
larger, expertly tuned aircraft. If you’re new to flying off the water
or want an extra margin of safety while familiarizing yourself with the
airplane, you have the option of enabling SAFE Select features like
self-leveling and angle limits. No programming is required. All you do
is change up the binding sequence as directed in the manual. If you
don’t want to enable the SAFE Select technology, just bind the receiver
normally and it will function like a standard AS3X receiver. You can
even fine-tune its AS3X settings if you have the Spektrum programming
interface and a compatible programming cable (both available
separately).
Integrated Hull with Removable Landing Gear: One of the
distinguishing features of the ICON A5 is its integrated hull and
Seawings design that makes water takeoffs and landings remarkably easy.
The model’s hull has been designed so that it not only looks realistic
but provides the same pilot-friendly handling on the water as the
full-scale version. If there’s no water around but you have a suitable
patch of pavement, bolt-on landing gear with a steerable nose wheel is
included so you can fly almost anywhere.
Big Battery Hatch with Cockpit Details: The entire
cockpit section is magnetically secured and easily removed for
unfettered access to the model’s spacious battery compartment. The
cockpit itself boasts a tinted windshield, painted pilot figure,
seatbacks and an instrument panel.
Durable Z-Foam™ Airframe: The airframe is
constructed of tough Z-Foam material that is inherently water resistant
and can handle the demands of amphibious flying.
Specifications: Approximate Assembly Time: Less than 1 Hour
CG (Center of Gravity): (30-35mm) back from the leading edge of the wing
Completion Level: Bind-N-Fly
Flying Weight: 44.4 oz (1260g)
Landing Gear: Yes
Length: 34.5 in (875mm)
Material: Z-Foam
Minimum Required Radio: 4 channel
Minimum Speed Control: 30A Brushless ESC (included)
Motor Size: 480-size 960Kv brushless outrunner (installed)
Propeller Size: 9 x 8
Recommended Motor Battery: 3S 11.1V 2200mAh 30C
Servos: 4 total (installed)
Wingspan: 52.5 in (1330mm)
Needed to Complete:
Requires a full-range 4+ channel DSMX®/DSM2® transmitter
Requires a 2200mAh 3S LiPo battery with an EC3™ connector and charger
