Helion Conquest 10MT XLR Brushless 1/10 RTR 2WD Electric Monster Truck

The Helion Conquest 10MT XLR is a 2WD, all-weather, all-terrain Mountain Truck that’s as happy backyard bashing as it is leaping off ramps, scorching through scree, or performing long rubber-burning wheelies. Not until you take a closer look will you appreciate the finer points of the rigid, workmanlike, composite chassis, the robust independent suspension and oil-filled, coil-over shocks, the fully enclosed spur gear housing that hides an adjustable slipper clutch, the authentic high-grip, long-wear, V-tread tires and the durable high torque servo.

But that’s not the whole story. Like all top-end RC trucks we’ve made a point of providing stand-alone electronic components to keep maintenance simple and cost effective, we’ve also thrown in a Helion 2000mAh 7.2V rechargeable NiMH battery and, as if that’s not enough, it’s all supported by a high performance 3625 3300Kv brushless motor, Helion 50 amp ESC and IKONNIK’s ET-3 radio with rock-solid Krypton 2.4GHz protocol. That’s quite a package and at such an attractive price you can relax and drive it like you stole it… Which, to be fair, you almost did.

Helion Brushless Power System
Equipped with a high-performance Helion 3625 3300kV brushless motor and 50 amp all-weather ESC, you can be assured of speed and acceleration no matter what the conditions. Once you’ve mastered driving with the included 7.2V NiMH battery you can upgrade to a 3S LiPo and unleash the full potential of the 10MT XLR.

In-Depth Features:

• IKONNIK ET3 Transmitter:
• 2.4GHz operation avoids conflicts with other users.
• Easily pairs with IKONNIK Krypton (Kr) protocol radio systems.
• Low voltage warning.
• Switched third channel.
• Ergonomic grip, trigger and steering wheel.
• Steering dual rate.
• End point adjustment.
• Ready To Run: The Conquest 10MT XLR is supplied 100% factory assembled and ready to run. Included is a brushless power system, IKONNIK ET3 3-channel 2.4GHz Tx, 7.2V 2000mAh NiMH battery and AC mains charger. All you need to complete is 4 ‘AA’ batteries for the transmitter.
• Non-integrated Electronics: In tandem with higher spec RC buggies, individual electronic components (steering servo, receiver and speed controller) keep spares costs low and increase upgrade / tuning options.
• Dust Cover: When you’re out bashing and scribing doughnuts in the dirt you’ll really appreciate the extra protection provided by the MT’s close-fitting dust cover.
• Slipper Clutch: Hidden behind the enclosed and protected spur gear is a fully adjustable slipper clutch that eliminates unnecessary loading and wear in the drivetrain and rear suspension.
• Adjustable Suspension: Anodized aluminum caps add a touch of class to the large, adjustable oil-filled coil-over shocks that help keep you in complete control over the roughest off-road conditions.

Specifications:
Motor: 3300kV brushless
ESC: 50A brushed
Battery: 2000mAh 7.2V 6-cell rechargeable NiMH
Gear Pitch: 48P
Wheels: 12mm Hex
Length: 480mm (18.9in)
Height: 180mm (7.1in)
Width: 330mm (13.0in)
Wheelbase: 282mm (11.1in)
Weight (approx): 2.36Kg (5.2lbs)
Pair with: IKONNIK Krypton protocol

Includes:

• Conquest 10MT XLR
  
• ET3 3-channel 2.4GHz transmitter
• 2000mAh 6-cell 7.2V rechargeable NiMH battery
• Mains battery charger
• Quick-Start Guide

Needed to Complete:

• (4) "AA" Batteries (for transmitter)