This is the E-flite Habu 32x DF ARF. The E-flite Habu 32x DF jet takes
electric ducted fan (EDF) performance and engineering to new heights.
Designed around the E-flite Delta-V 32 80mm fan unit and high-speed DF32
brushless motor, its hyper-efficient intake and exhaust ducting deliver
a potent power system that produces a large amount of thrust available
as quickly as you can move the throttle stick. The redesigned swept-back
wing and horizontal stabilizers enhance the sleek appearance. The
result is a sport EDF that will give even experienced jet jockeys goose
bumps. The Habu 32x DF boasts a level of fit and finish that is every
bit as impressive as its performance. Even more satisfying is the short
amount of time you’ll need to get this hot-rod flight-ready, combined
with flight performance that the discerning modeler and expert pilot can
appreciate.
Rigid Construction The swept-back planform of the wings and horizontal stabilizers
feature full-balsa sheeting and genuine UltraCote® film covering. The
wings attach to the fuselage using carbon fiber blade spars that fit
into aluminum sockets for a rigid structure that can handle incredible
speeds and G-loads.
Retract Ready
The Habu 32x DF features built-in wheel wells and
hard-points that easily accept the required retracts such as the E-flite
15-25 size electric retracts (sold separately). The gear doors included
improve streamlining and conceal the main landing gear struts when
they’re retracted.
Fast Assembly The ailerons, elevator and flaps use a sealed-hinge of genuine
Hangar 9® UltraCote® covering for a clean look and less drag. The
complex, bifurcated fiberglass intake ducts are factory installed and
perfectly faired inside the fuselage so you can get in the air quicker.
Optimized Ducting
An optimized intake and exhaust design delivers maximum fan
thrust without requiring cheater holes. As a result, the Habu 32x DF
delivers outstanding performance in all flight conditions, reduced amp
draw, quieter operation and a better flying experience overall.
Easy Access that’s Sleek
The quick-release hatch makes swapping out batteries and
accessing electronics easy. Nose and belly hatches make access to the
nose gear and EDF simple. A tinted clear canopy adds greatly to its
"real" appearance in flight. Pilot figure not included.
Features:
Streamlined swept-back planform design
Vibrant trim scheme in high-gloss paint and genuine Hangar 9® UltraCote® covering
Molded fiberglass fuselage and vertical stabilizer
Full balsa-sheeting wing and horizontal stabilizers
Two-piece, plug-in wings and stabilizers with carbon blade spar support
Pre-hinged elevators, ailerons and functional flaps
Hyper-efficient inlet and exhaust duct design
Ready for the E-flite® Delta-V® 32 EDF power system (sold separately)
E-flite 15-25 size electric retract ready (required-sold separately)
Optimized for use with modern Spektrum™ micro servo technology
Includes main wheel landing gear doors that improve streamlining
Quick-release battery hatch features a tinted canopy and cockpit detail
Complete precision hardware package includes machined aluminum wheels
Specifications: Wingspan: 42.0 in (1070mm)
Overall Length: 49.5 in (1250mm)
Wing Area: 412 sq. in. (26.6 sq. dm.)
Flying Weight: 7.05 - 7.50 lb (3.20 - 3.40 kg)
Motor Size: DF 32 Brushless Motor, 2150Kv
Radio: 6+ Channel Radio System (required)
Servos: Micro Servos (8 required)
Trim Scheme Colors: UltraCote - Dark Yellow, Silver, Pearl Charcoal
CG (center of gravity): 4.30-4.90 in (110-125mm) back from the leading edge at wing root
Speed Control : 80-Amp brushless
Recommended Battery: 22.2V 6S 5000mAh 30C LiPo, 10AWG, EC5
Flaps: Yes
Retracts: Required (not included)
Experience Level: Advanced
Recommended Environment: Outdoor
Assembly Time: 7-9 Hours
