This is the E-flite Habu 32x DF ARF. The E-flite Habu 32x DF jet takes
electric ducted fan (EDF) performance and engineering to new heights.
Designed around the E-flite Delta-V 32 80mm fan unit and high-speed DF32
brushless motor, its hyper-efficient intake and exhaust ducting deliver
a potent power system that produces a large amount of thrust available
as quickly as you can move the throttle stick. The redesigned swept-back
wing and horizontal stabilizers enhance the sleek appearance. The
result is a sport EDF that will give even experienced jet jockeys goose
bumps. The Habu 32x DF boasts a level of fit and finish that is every
bit as impressive as its performance. Even more satisfying is the short
amount of time you’ll need to get this hot-rod flight-ready, combined
with flight performance that the discerning modeler and expert pilot can
The swept-back planform of the wings and horizontal stabilizers feature full-balsa sheeting and genuine UltraCote® film covering. The wings attach to the fuselage using carbon fiber blade spars that fit into aluminum sockets for a rigid structure that can handle incredible speeds and G-loads.
The Habu 32x DF features built-in wheel wells and hard-points that easily accept the required retracts such as the E-flite 15-25 size electric retracts (sold separately). The gear doors included improve streamlining and conceal the main landing gear struts when they’re retracted.
The ailerons, elevator and flaps use a sealed-hinge of genuine Hangar 9® UltraCote® covering for a clean look and less drag. The complex, bifurcated fiberglass intake ducts are factory installed and perfectly faired inside the fuselage so you can get in the air quicker.
An optimized intake and exhaust design delivers maximum fan thrust without requiring cheater holes. As a result, the Habu 32x DF delivers outstanding performance in all flight conditions, reduced amp draw, quieter operation and a better flying experience overall.
Easy Access that’s Sleek
The quick-release hatch makes swapping out batteries and accessing electronics easy. Nose and belly hatches make access to the nose gear and EDF simple. A tinted clear canopy adds greatly to its "real" appearance in flight. Pilot figure not included.
Wingspan: 42.0 in (1070mm)
Overall Length: 49.5 in (1250mm)
Wing Area: 412 sq. in. (26.6 sq. dm.)
Flying Weight: 7.05 - 7.50 lb (3.20 - 3.40 kg)
Motor Size: DF 32 Brushless Motor, 2150Kv
Radio: 6+ Channel Radio System (required)
Servos: Micro Servos (8 required)
Trim Scheme Colors: UltraCote - Dark Yellow, Silver, Pearl Charcoal
CG (center of gravity): 4.30-4.90 in (110-125mm) back from the leading edge at wing root
Speed Control : 80-Amp brushless
Recommended Battery: 22.2V 6S 5000mAh 30C LiPo, 10AWG, EC5
Retracts: Required (not included)
Experience Level: Advanced
Recommended Environment: Outdoor
Assembly Time: 7-9 Hours
Needed To Complete: